Betamotor EVO 4t Manual do Utilizador descarregar pdf (Página 13)

LUBRICATION CIRCUIT

betamotor.com

Unscrew the plug in the left-hand casing and use

pliers to extract the filter. Clean it carefully and blow

it through with compressed air. Check for damage

to the O-rings, and replace them if necessary. Refit

all the parts and tighten the plug to 15 Nm.

Carry out the same procedure for the output mesh

filter, for which the access is via the right-hand en-

gine casing.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 77 78

Sem comentários

Betamotor EVO 4t Manual do Utilizador Página 13