Betamotor EVO 4t Manual do Utilizador descarregar pdf (Página 52)

ASSEM BLY

betamotor.com

Insert the two filters (17) into their holes, after first

lubricating them with oil and fitting the O-rings

(18).

N.B. The two filters have a tapering internal cavity.

Use a pin punch with a taper point to facilitate fit-

ting.

Refit the filter covers (20), tightened to a torque of

10 Nm, after fitting the O-rings (19). Also close the

oil drain hole with the drainplug (21) and 16x22.5x1

gasket, tightening it to 20 Nm.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 77 78

Sem comentários

Betamotor EVO 4t Manual do Utilizador Página 52