Betamotor EVO 4t Manual do Utilizador descarregar pdf (Página 41)

ASSEM BLY

betamotor.com

Fit the crankshaft oilseal (2) in its housing, with

the open side facing inwards. Remember to grease

the outer surface to facilitate seating. Then secure

the oilseal with its retaining plate and tighten the

screws to a torque of 3 Nm, after applying medium-

strength thread lock.

Fit the oil filter spigot (3) with its O-ring.

N.B. The spigot is an interference fit in its housing.

Close the oilways with the special oilway expansion

plugs (4), using a pin punch.

Make sure that the oilway is clear by blowing it

through with compressed air.

Fit the oil level plug (5), tightening it to 10 Nm.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 77 78

Sem comentários

Betamotor EVO 4t Manual do Utilizador Página 41